Ice and water. One tap.
Hot, cold, and ice on a single plumbed-in unit. The i14 runs dual RO membranes in parallel - twice the throughput so the cold tank and ice bin keep up with peak demand.
Everything on one dispenser.

NEW Combination Ice & Water Dispenser.
The ultimate in water coolers - hot, cold, and ambient water plus “tulip” or “bullet” ice, shaped to cool beverages as quickly as possible. Brew tea or ice down a drink as easily as filling a water bottle. Fully touchless.
- Hot, cold, and ambient water from a single unit
- Tulip/bullet ice shape - cools beverages faster
- Fully touchless dispense - no button pressing
- Dual RO membranes - parallel throughput for peak demand
- Filter service every 6 months - included on your plan

Countertop Water and Ice Dispenser.
Designed with elegance to complement any workspace. Dispenses hot and ambient water plus nugget-style ice. Taller than your average countertop unit, the i16 produces 165 lbs. of ice a day - with an optional base for a freestanding setup.
- Nugget-style ice - chewable, cafe-quality
- Produces up to 165 lbs of ice per day
- Hot and ambient water on the same unit
- Countertop footprint - optional base for freestanding
- Multi-stage RO filter bank sized for the i16's draw
Why dual RO (i14)
Two membranes.Twice the throughput.

A single RO membrane can't keep up.
Making ice and serving cold water both pull from the same filtered supply. At peak office hours, a single-membrane unit falls behind - the cold tank drops, the ice bin empties, and someone's standing at the dispenser waiting.
Two membranes. More water, in less time.
The i14 runs two RO membranes in parallel. Twice the throughput means the cold tank stays full and the ice bin refills between rushes - the unit keeps up with the busiest hour of the day.
Clean water in, fewer service calls out.
Scale and sediment are what kill ice makers. 4-stage RO removes them before they reach the unit, so the ice maker lasts longer. Less buildup, fewer breakdowns, fewer service calls.
Filters swapped every 6 months.
Ice units earn a filter change every 6 months (vs. annually on water-only models). It's all in the monthly rate - we track the schedule, we come to you, you never think about it.
Start a 7-day free trialBuilt for offices that drink a lot.
I 14 vs. the ice alternatives.
Bagged ice or countertop ice maker
- Someone runs to the store for bags, or wrestles a countertop unit that makes ice slowly and melts between shifts
- Countertop ice makers use unfiltered tap water - cloudy cubes, scale buildup, replaced every couple of years
- Bags of ice = plastic waste, freezer real estate, and a cost line that never gets smaller
- Separate water cooler needed on top of all that
I 14 plumbed-in water + ice
- Hot, cold, and ice on one dispenser - plumbed into your cold-water line
- Dual RO membranes (i14): twice the throughput for peak ice + water demand
- Flat on a 5-year plan - filters serviced every 6 months, included
- Zero plastic, zero bagged-ice runs, zero freezer real estate
Our 4-Stage Filtration Process
Every RO Living Water system uses the same 4-stage reverse-osmosis path: sediment pre-filter, carbon block, RO membrane, post-carbon polish. Removes ~90% of total dissolved solids.
-
Stage 1 · Sediment
Removes dirt, silt, rust, pipe residue, and microplastics
-
Stage 2 · Carbon block
Reduces chlorine, chemicals, and pesticides
-
Stage 3 · RO membrane
Reduces dissolved solids, pharmaceuticals, and metals
-
Stage 4 · Post-carbon polish
Polishes residual taste from the membrane. On the i14, minerals are added back at this stage for flavor; the i16 produces clean, mineral-light water.
Ready to put ice on the line?
Steve and Jonah handle every install personally - 4-6 hours, install fee due at contract signing - not charged during the trial.